bikertrash35967

do you have to drill out the rivets out of the vent widows and remove the window out of the frame to install a new vent window rubber? thanks for your help! 

Quote 0 0
68autobug

You need to drill out the single rivet at the top...

and unscrew the bottom of the frame from the door...

and pull the window up from the door...

I have seen where the rubbers have been cut and fitted without drilling the rivet out..

If the cut in the rubber is glued together...

You won't have to undrill the rivet...

fitting the new rivet can be a problem...

I have used small stainless steel allen headed screws instead of the rivet.. and locktite the nut on..

or use two nuts to lock them on...

 

best of Luck

 

Lee -- 68AutoBug -- Australia --

 

http://community.webshots.com/user/vw68autobug

 

 

 

68AutoBug - helping keep air cooled Volkswagens alive in Australia & around the World -

http://community.webshots.com/user/vw68autobug
-
Quote 0 0